Grip-Rated Slip-Resistant Flooring for Gatineau Operations
Kitchens, freezer zones, wash-down areas and locker rooms demand flooring with measurable slip resistance. Gatineau Concrete builds aggregate-broadcast systems and textured coatings that meet your insurance and industry slip-rating requirements. We specify, install and verify the finished grip rating on every project.
Slip-Resistant Flooring Reduces Liability and Protects Staff
A single slip-and-fall incident in a commercial kitchen or processing plant can cost tens of thousands in medical, legal and operational expenses. Insurance underwriters require slip-rated flooring in defined wet zones because the risk is real and measurable.
The difference between a floor that looks textured and one that actually holds a slip rating is how the aggregate is installed. When silica, quartz or proprietary aggregate is broadcast into a wet primer coat and then sealed under a topcoat, the texture becomes part of the concrete system itself. Aggregate sprinkled on top of a finished coating wears away in weeks. We build the grip into the slab.
Our commercial epoxy systems often include broadcast aggregate in the body coat for dual performance (durability plus grip). We also retrofit existing polished concrete with textured topcoats in high-slip zones, and coordinate with commercial floor repair when sections have failed.
Recent work
Installation sequence
How Slip-Resistant Flooring Gets Built in Gatineau
Assess and specify
We walk the space, identify which zones require slip-rated flooring (food prep, freezer access, wash-down), confirm the slip rating your insurance or industry standard calls for, and select the aggregate type and system that matches both the use and the environment.
Prepare the slab
The concrete is diamond-ground to the correct profile, old coatings and contaminants removed, cracks filled and sealed, and the surface cleaned to bare concrete ready for the primer.
Broadcast aggregate
The primer or body coat is applied to the prepped slab, and aggregate is broadcast into the wet coat at the precise loading rate needed to achieve the target slip rating. The aggregate is worked into the coat, not just scattered on top.
Seal and verify
The topcoat is applied at the correct thickness to lock the aggregate in place while keeping the texture exposed. The floor cures to specification, and the finished slip resistance is tested and verified against the target rating before handoff.
Common installation mistakes
Slip-Resistant Flooring Fails When the System Is Wrong
The most frequent failure we see is aggregate that is either too coarse for the use (a kitchen floor with abrasive broadcast that shreds mop heads and is uncomfortable underfoot) or too fine (a wash-down area where the slip rating disappears after a few weeks of daily water and chemical exposure). The system has to match the actual use, not a generic specification.
We size the aggregate grain, loading density and topcoat thickness to your specific environment. We also coordinate with any adjacent self-leveling concrete work if the slab is out of plane, and integrate with the rest of your commercial floor systems so the slip-resistant zones blend with the rest of the space.
Slip ratings, aggregate types, wear life and where slip-resistant is non-negotiable.
Industry slip-resistance tests (such as dynamic coefficient of friction) measure how much grip a floor provides under wet and dry conditions. We specify the system to meet or exceed the target rating for your environment, and verify the finished floor against that target.
Silica sand is the standard for general anti-slip; quartz aggregate is more decorative and harder-wearing; proprietary aggregates exist for specific environments (chemical resistance, high-temperature). We pick based on use, durability and look.
A properly built system, aggregate broadcast into the body coat and locked under the topcoat, holds its slip rating for years. Surface-sprinkled aggregate fails much faster. The system construction is what makes the difference.
Slightly, yes, the texture catches more dirt than a smooth floor. But modern auto-scrubber pads and the right cleaning chemicals make it manageable in any commercial maintenance routine. We share cleaning guidance with the maintenance team at handoff.
Often, yes. A textured coating can sometimes be applied over a clean, sound existing floor to add slip resistance without removal. When the existing floor is already failing, full system removal and replacement is the honest answer.
Client reviews
What Gatineau Operators Say About Their Slip-Resistant Floors
Our kitchen floor was a slip waiting to happen. New slip-resistant system installed, insurance was happy, staff feel safer. Worth the install many times over.
X. Z.
Restaurant Owner, Gatineau
★★★★★
Wash-down zone needed a slip-rated floor with chemical resistance. They specced the right system for both, install was clean, has held through two years of daily wash-down.
W. Z.
Food Processing Manager, Ottawa
★★★★★
Locker-room floor with proper slip rating. Members notice the grip, the maintenance crew can still clean it normally. Right balance of safety and practicality.
Z. Q.
Fitness Facility Director, Barrhaven
★★★★★
Slip-rated flooring throughout the wet zones. The texture is comfortable under foot, not aggressive, but the grip rating is real. Patients and staff both benefit.
Y. Q.
Healthcare Operations Lead, Nepean
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Gatineau.
Tell us which zones need grip-rated flooring and what your insurance or industry standard requires. We will assess on-site and quote the right system in writing.
