Concrete Floors Built for Manufacturing in Gatineau
Your factory floor takes a beating. Forklifts, chemical spills, static-sensitive assembly lines, airborne dust in clean rooms. Gatineau Concrete sizes the slab and selects the coating system to match what your process demands. Heavy-duty, chemical-resistant, anti-static, or dust-proof. We schedule work around your production and deliver a free written estimate before we start.
The concrete slab is not decoration in a factory. It is load-bearing infrastructure. A slab that is too thin spalls under impact; one that is not reinforced cracks under point loads; one that is not sealed absorbs chemicals and dust. The slab has to be right before the coating goes down.
And where the issue is airborne dust in a clean room or finished-goods area, dust-proof concrete sealing closes the slab surface so it stops shedding particles. Every system starts with a sound concrete pour and proper prep.
Recent work
Installation sequence
How Manufacturing Concrete Floors Get Built in Gatineau
Assess the process
We walk the floor with you, document the equipment, loads, chemicals, static or dust exposure, and the compliance or cleanliness standard the room must meet.
Prepare the slab
We grind, shot-blast, or scarify the existing concrete, fill cracks and low spots, and test for moisture so the new system bonds to a clean, sound surface.
Install the system
We apply primer, base coat, and topcoat to specification, whether heavy-duty, chemical-resistant, ESD, or dust-proof, with full documentation and testing.
Cure and handoff
Each section is cured to full strength, tested for performance, marked with the date it can carry traffic, and handed off with a maintenance schedule.
Four floor types
Matching the Concrete Floor System to Your Process
Not all manufacturing floors are the same. A fabrication shop with dropped steel and coolant spills needs a heavy-duty slab with chemical-resistant coating. An electronics assembly line needs ESD flooring that is grounded and tested. A pharmaceutical warehouse needs dust-proof sealing to keep particles out of finished goods.
We size the slab, pick the coating, and schedule the work so production does not stop. Chemical-resistant flooring uses epoxy or urethane systems engineered to your specific chemistry. Heavy-duty concrete is poured thicker and reinforced for impact and load. We match the system to the room, not the room to the system.
Load, chemistry, static, and dust control for industrial manufacturing concrete in Gatineau.
By matching it to the process. We confirm loads, chemicals, static or dust requirements and the cleanliness or compliance standard, then choose between heavy-duty, chemical-resistant, ESD or dust-proof systems.
Yes. A heavy-duty slab with a chemical-resistant coating handles both, the slab takes the impact and load, the coating sheds the spills. We engineer the combination to your specific chemistry.
ESD flooring is a grounded floor system that dissipates static electricity. Electronics, pharmaceutical and battery operations need it because a static discharge from a normal floor can damage products or trigger an event.
Usually. We phase the work cell by cell or shift the schedule to off-hours, so production keeps running while one area cures. The phasing plan is built with you before the first prep.
It depends on the room. Dust-proof sealing closes the slab against airborne dust at a fraction of a full coating's cost. Where chemicals, impact or static are also factors, the room needs a full system.
Client feedback
What Gatineau Plant Managers Say About Their Concrete Floors
Describe the process, the loads, chemicals, static or dust exposure, and we will engineer a slab and coating system, prepare a written estimate with line items, and schedule the work around your production.
