Gatineau's Line Pump Concrete, Ground-Level Reach, Lower Cost
When the ready-mix truck parks at the curb and the pour point is a basement floor, a backyard slab, or a foundation 150 feet away, a line pump threads rubber and steel hose from truck to placement zone. Gatineau Concrete operates line pumps with experienced crews. Every job starts with a free on-site assessment.
Choosing a Gatineau Line Pump, Which Pours Fit Best
A line pump sits on the ground beside the ready-mix truck and pushes concrete through a series of connected hose sections. Unlike a boom pump, there is no hydraulic arm lifting concrete overhead. Instead, the hose lays along whatever path the site allows, through a gate, around a corner, down a stairwell, or across a yard, and concrete flows continuously to the placement crew at the far end. That flexibility makes line pump the go-to choice for residential slab pours, basement floor placements, and foundation work where the truck simply cannot park close enough for a chute pour.
The economics are straightforward. Line pump equipment costs considerably less to operate than a boom pump, and that difference shows up directly in the quote. For any pour where the concrete stays at or near grade, line pump almost always delivers better value. Basement floors are a particularly good fit: the hose feeds through a window opening or an exterior door, and the operator controls flow rate to match the pace of the finishing crew working inside.
Gatineau Concrete coordinates line pump service alongside standard ready-mix supply and the full range of concrete pumping options. For pours requiring vertical reach above grade, see our boom pump service. Contractor crews who need equipment only can review pump rental options.
Recent work
How it works
From Truck to Slab, How Gatineau Concrete Runs a Line Pump
Site read and hose routing
Before the truck arrives, the operator walks the site to identify where the pump parks, where the concrete lands, and the cleanest path between the two. Tight turns, grade changes, and any openings the hose must pass through are noted and planned around.
Pump positioning and hose assembly
The pump truck backs into its planned spot. Hose sections are connected in sequence from the pump outlet to the placement nozzle, with the total assembled length matched to the measured route. Clamps and couplings are checked before the first yard moves.
Grout prime, then concrete flow
A grout slurry is pushed through the full hose length first, coating the interior so the concrete mix does not lose paste to the dry pipe walls. Once the prime exits at the nozzle, the operator opens the pump to concrete and adjusts output to the placement crew's pace.
Cleanout and site departure
After the final yard is placed, a foam ball is pushed through the hose with compressed air or water, clearing residual concrete back toward the pump. Hose sections are broken down, the pump is flushed, and the site is left clean.
When to choose line
Planning a Pour? Here's When Line Pump Concrete Makes Sense
Three questions help narrow the choice. First: can the ready-mix truck park within chute distance of the pour? If yes, no pump is needed at all. If no, move to the second question: does the concrete need to travel upward more than a storey or clear a major overhead obstacle? If yes, a boom pump is the right call. If no, a line pump handles the job at a fraction of the cost.
That third scenario covers the majority of residential and light-commercial pours in Gatineau. A backyard patio slab behind a row house, a basement floor in a new build where the walkout is not yet cut, a garage slab addition where the truck cannot swing around the existing structure, all of these are line pump territory. The hose routes around the obstacle, the operator manages flow, and the finishing crew works at a steady pace without waiting on concrete.
Pricing follows a setup fee plus an hourly rate tied to pour duration. Because the equipment is simpler than a boom truck, the hourly rate is meaningfully lower. Longer pours bill additional time beyond the quoted window, so accurate pour-volume estimates at booking keep the final invoice close to the quote. See the concrete cost guide for general pricing context, review concrete FAQs for common questions, or check the concrete calculator to estimate your slab volume before calling. For warehouse or industrial slab work, the warehouse concrete page covers heavier-duty floor requirements.
Hose length, basement access, pricing and when line beats boom.
Hose can be assembled to substantial lengths depending on the pump's pressure capacity and the concrete mix being placed. Most residential and commercial pours fit easily within standard line length; we confirm reach during the site assessment.
Yes, often the best option for basement placement. The hose can be run down a window opening, through an exterior door, or through a basement walkout to deliver concrete directly to the basement floor area without chute access.
Usually yes, significantly cheaper. The equipment cost is much lower and the setup is simpler. For projects within line pump's capability (ground-level reach), it is almost always the better value.
Clear the planned hose route, identify any sharp turns the hose cannot handle, and have the placement crew positioned. We confirm the prep details when booking.
Typically a setup fee plus hourly rate. Line pump rates are lower than boom pump rates reflecting the lower equipment cost. The quote covers expected pour duration; longer pours bill additional time.
Client reviews
What Gatineau Contractors Say About Their Line Pump Service
Line pump for a backyard patio that the truck could not reach by chute. Hose run through the side gate, no boom needed, way less than a boom would have cost. Right tool, right price.
Z. N5
Slab Contractor, Gatineau
★★★★★
Basement floor pour with line pump fed through a window opening. Concrete delivered directly to the placement zone, no awkward chute angle. Operator made it look easy.
Y. N5
Foundation Contractor, Ottawa
★★★★★
Multiple slab pours on a custom build, line pump dispatched for each. Consistent quality, on-time arrival, and the operator was the same on every visit. Real relationship.
Q. N5
Home Builder, Barrhaven
★★★★★
They recommended line pump when we asked about boom pump, saved us real money on a project where line had the reach. Honest spec, smaller bill, same quality.
X. N5
Commercial GC, Nepean
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Gatineau.
Schedule Your Gatineau Line Pump, Free Written Quote
Share the pour location, the placement zone dimensions, and your target pour date. Gatineau Concrete will assess the site and send a written quote within one business day.
